Rock Tumblers
Rock Cutters
Abrasives
Grit Kits
Parts and Supplies!
Home
Store Info
Map To Us
Email Us
Order Form
Classes
Links
Lapidary
Rock Polishing
Rock Saws
Sawblades
Sculpting
Cabbing
Faceting
Sphere Makers
Books
Jewelry Tools
| |
|
|
| |
Fiber Burnout Furnaces
| Heats to 1000 degrees F (538 C) in 30 min. |
| The digital control models use the DTC-800 controller, eliminating the need for a pyrometer. With this feature packed temperature controller, you can program up to eight ramps (raising or lowering the temperature at the rate you specify) and eight dwells (holding the temperature constant for the length of time you specify.) The digital models use a type-K thermocouple, long proven for it's reliability. The controller will shut off automatically should the thermocouple fail and the cdontroller stores up to six programs even if the power shuts off. The furnace has a one year warranty. The controller has a two year warranty. Can be shipped UPS. Shipping Weight 108lbs. (49kg) |
| (requires 20 Amp dedicated line) |
|
|
| (requires 10 Amp dedicated line) |
|
|
| |
|
|
| The manual control models use an infinite control switch with pilot light. A pyrometer hole is drilled in the back of the firing chamber. (Pyrometer not included, sold below). The furnace comes with a one-year warranty. A digital controller may be purchased separately to be used in place of the pyrometer. Can be shipped UPS. Shipping Weight 108lbs (49kg) |
| (requires 20 Amp dedicated line) |
|
|
| (requires 10 Amp dedicated line) |
|
|
| |
|
|
| Used to measure temperature in burnout ovens. Measure within 98% accuracy, from 0 to 2500 degrees F (0 to 1371 C) on meter. Have 5" (127 mm) lead and sheathed 1/8th (3.2 mm) thermocouple. Can be mounted on wall. Available with analog or digital readings. |
| |
|
|
| |
|
|
| For use with Grobet USATM burnout furnaces, as well as most other 120 or 240 volt furnaces. Same programming features as described above. Shipping Weight 13 lbs (6 kg) |
| (requires 20 Amp dedicated line) |
|
|
| (requires 10 Amp dedicated line) |
|
|
| Features in infinite control switch and maximum operating temperature of 2000 degrees F (1093C). Includes a pre-drilled hole in the back of the firing chamber, for easy insertion of a thermocouple. FOr use with a digital or or analog pyrometer or digital controller. Elements are exposed in dropped, recessed grooves and the swing-style door open wide for easy flask handling. Kiln base keeps firing chamber off your work surface, so a stand is not needed. A peephole in the door and vent hole in top have metal covers. |
| Firing chamber dimensions: 8-1/2" W x 8-3/4" H x 9" D (21.6 x 22.2 x 22.9 cm) Outside dimensions: 17-1/4" W x 17-3/4" H x 18" D (43.8 x 45.1 x 45.7 cm) |
| (requires 20 Amp dedicated line) |
|
|
| (requires 10 Amp dedicated line) |
|
|
| |
|
|
| |
|
|
| Firing chamber dimensions: 13" W x 8-3/4" H x 13-1/2" D (33 x 22.2 x 34.3 cm) Outside dimensions: 21-1/2" W x 18-1/2"" H x 23" D (54.6 x 21.6 x 58.4 cm) |
| (requires 20 Amp dedicated line) |
|
|
| (requires 10 Amp dedicated line) |
|
|
| |
|
|
| |
|
|
| Supported by a heavy-duty kiln stand and clad in a thick stainless steel jacket, for years of quality service. |
| Shipping Weight 49 lbs (22 kg) |
| (uses 20 Amp fuse). |
|
|
| (uses 20 Amp fuse). |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
/ Rock Tumblers / Vibratory Tumblers / About Tumblers / Flat Lap Polishers / Abrasives & Polish / Tumbler Parts / Flex-Shaft Machines / Sphere Makers / Rock Saws / Saw Blades / Faceting / Sanding Discs / Polishing Pads / Sanding Belts & Rolls / Drums & Polish Heads / Grinding Wheels / Cabbing Machines / Jewelry Tools / Classes / Books / Store Info / Map To Us / Ordering Info / Policies and Information / Order Form / Email Us
We welcome questions or comments about this web site: pearsons@pearsons-uslj.com